Archive for the ‘Fedora’ Category
Ruby-MySQL Columns
Last week I posted how to configure and test Ruby and MySQL. Somebody asked me how to handle a dynamic list of columns. So, here’s a quick little program to show you how to read the dynamic list of column (and this updated blog post has the 2024 update for the new Mysql2 ODBC driver):
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 | require 'rubygems' require 'mysql' # Begin block. begin # Create a new connection resource. db = Mysql.new('localhost','student','student','studentdb') # Create a result set. rs = db.query('SELECT item_title, item_rating FROM item') # Read through the result set hash. rs.each do | row | out = "" i = 0 while i < db.field_count # Check if not last column. if i < db.field_count - 1 out += "#{row[i]}, " else out += "#{row[i]}" end i += 1 end puts "#{out}" end # Release the result set resources. rs.free rescue Mysql::Error => e # Print the error. puts "ERROR #{e.errno} (#{e.sqlstate}): #{e.error}" puts "Can't connect to MySQL database specified." # Signal an error. exit 1 ensure # Close the connection when it is open. db.close if db end |
The new logic on lines 13 through 22 reads the list of columns into a comma delimited list of values. The if-block checks to make sure it doesn’t append a comma to the last column in the list. It prints output like:
The Hunt for Red October, PG Star Wars I, PG Star Wars II, PG Star Wars II, PG Star Wars III, PG13 The Chronicles of Narnia, PG RoboCop, Mature Pirates of the Caribbean, Teen The Chronicles of Narnia, Everyone MarioKart, Everyone Splinter Cell, Teen Need for Speed, Everyone The DaVinci Code, Teen Cars, Everyone Beau Geste, PG I Remember Mama, NR Tora! Tora! Tora!, G A Man for All Seasons, G Hook, PG Around the World in 80 Days, G Harry Potter and the Sorcerer's Stone, PG Camelot, G |
As always, I hope this helps those looking for a solution.
MySQLdb Manage Columns
Sometimes trying to keep a post short and to the point raises other questions. Clearly, my Python-MySQL Program post over the weekend did raise a question. They were extending the query example and encountered this error:
TypeError: range() integer end argument expected, got tuple. |
That should be a straight forward error message because of two things. First, the Python built-in range() function manages a range of numbers. Second, the row returned from a cursor is actually a tuple (from relational algebra), and it may contain non-numeric data like strings and dates.
The reader was trying to dynamically navigate the number of columns in a row by using the range() function like this (where row was a row from the cursor or result set):
for j in range(row): |
Naturally, it threw the type mismatch error noted above. As promised, the following Python program fixes that problem. It also builds on the prior example by navigatung an unknown list of columns. Lines 16 through 31 contain the verbose comments and programming logic to dynamically navigate the columns of a row.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 | #!/usr/bin/python # Import sys library. import MySQLdb import sys try: # Create new database connection. db = MySQLdb.connect('localhost','student','student','studentdb') # Create a result set cursor. rs = db.cursor() rs.execute("SELECT item_title, item_subtitle, item_rating FROM item") # Assign the query results to a local variable. for i in range(rs.rowcount): row = rs.fetchone() # Initialize variable for printing row as a string. data = "" # Address an indefinite number of columns. count = 0 for j in range(len(row)): # Initialize column value as an empty string. datum = "" # Replace column values when they exist. if str(row[count]) != 'None': datum = str(row[count]) # Append a comma when another column follows. if count == len(row) - 1: data += datum else: data += datum + ", " count += 1 # Print the formatted row as a string. print data except MySQLdb.Error, e: # Print the error. print "ERROR %d: %s" % (e.args[0], e.args[1]) sys.exit(1) finally: # Close the connection when it is open. if db: db.close() |
There are a couple Python programming techniques that could be perceived as tricks. Line 24 checks for a not null value by explicitly casting the column’s value to a string and then comparing its value against the string equivalent for a null. The MySQLdb returns a 'None' string for null values by default. The if-block on lines 27 through 30 ensure commas aren’t appended at the end of a row.
While the for-loop with a range works, I’d recommend you write it as a while-loop because its easier to read for most new Python programmers. You only need to replace line 20 with the following to make the change:
20 | while (count < len(row)): |
Either approach generates output like:
The Hunt for Red October, Special Collectornulls Edition, PG Star Wars I, Phantom Menace, PG Star Wars II, Attack of the Clones, PG Star Wars II, Attack of the Clones, PG Star Wars III, Revenge of the Sith, PG-13 The Chronicles of Narnia, The Lion, the Witch and the Wardrobe, PG RoboCop, , Mature Pirates of the Caribbean, , Teen The Chronicles of Narnia, The Lion, the Witch and the Wardrobe, Everyone MarioKart, Double Dash, Everyone Splinter Cell, Chaos Theory, Teen Need for Speed, Most Wanted, Everyone The DaVinci Code, , Teen Cars, , Everyone Beau Geste, , PG I Remember Mama, , NR Tora! Tora! Tora!, The Attack on Pearl Harbor, G A Man for All Seasons, , G Hook, , PG Around the World in 80 Days, , G Harry Potter and the Sorcerer's Stone, , PG Camelot, , G |
As always, I hope this helps those looking for clarity.
Perl-MySQL Program
Configuring Perl to work with MySQL is the last part creating a complete Fedora Linux LAMP stack for my students. Perl is already installed on Fedora Linux.
I’ve also shown how to use PHP, Python, and Ruby languages to query a MySQL database on Linux. After installing this additional Perl DBI library, my students will have the opportunity to choose how they implement their LAMP solution.
You can find the Perl version with the following version.pl program:
1 2 3 4 | #!/usr/bin/perl -w # Print the version. print "Perl ".$]."\n"; |
The first line lets you call the program without prefacing the perl program because it invokes a subshell of perl by default. You just need to ensure the file has read and execute privileges to run. It prints:
Perl 5.018004 |
You need to install the perl-DBD-MySQL library to enable Perl to work with MySQL. The following command loads the library:
yum install -y perl-DBD-MySQL |
It prints the following log file:
Loaded plugins: langpacks, refresh-packagekit Resolving Dependencies --> Running transaction check ---> Package perl-DBD-MySQL.x86_64 0:4.024-1.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: perl-DBD-MySQL x86_64 4.024-1.fc20 fedora 142 k Transaction Summary ================================================================================ Install 1 Package Total download size: 142 k Installed size: 332 k Downloading packages: perl-DBD-MySQL-4.024-1.fc20.x86_64.rpm | 142 kB 00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : perl-DBD-MySQL-4.024-1.fc20.x86_64 1/1 Verifying : perl-DBD-MySQL-4.024-1.fc20.x86_64 1/1 Installed: perl-DBD-MySQL.x86_64 0:4.024-1.fc20 Complete! |
The following item_query.pl Perl program is consistent with the PHP, Python, and Ruby examples provided in other blog posts. It shows you how to use the Perl DBI library to query and return a data set.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 | #!/usr/bin/perl -w # Use the DBI library. use DBI; use strict; use warnings; # Create a connection. my $dbh = DBI->connect("DBI:mysql:database=studentdb;host=localhost:3306","student","student",{'RaiseError' => 1}); # Create SQL statement. my $sql = "SELECT item_title FROM item"; # Prepare SQL statement. my $sth = $dbh->prepare($sql); # Execute statement and read result set. $sth->execute() or die $DBI::errstr; while (my @row = $sth->fetchrow_array()) { my $item_title = $row[0]; print "$item_title\n"; } # Close resources. $sth->finish(); |
You call it like this from the present working directory:
./mysql_query.pl |
It returns:
The Hunt for Red October Star Wars I Star Wars II Star Wars II Star Wars III The Chronicles of Narnia RoboCop Pirates of the Caribbean The Chronicles of Narnia MarioKart Splinter Cell Need for Speed The DaVinci Code Cars Beau Geste I Remember Mama Tora! Tora! Tora! A Man for All Seasons Hook Around the World in 80 Days Harry Potter and the Sorcerer's Stone Camelot |
Alternatively, there’s a different syntax for lines 20 and 21 that you can use when you’re returning multiple columns. It replaces the two statements inside the while loop as follows:
20 21 | my ($item_title, $item_rating) = @row; print "$item_title, $item_rating\n"; |
It returns:
The Hunt for Red October, PG Star Wars I, PG Star Wars II, PG Star Wars II, PG Star Wars III, PG13 The Chronicles of Narnia, PG RoboCop, Mature Pirates of the Caribbean, Teen The Chronicles of Narnia, Everyone MarioKart, Everyone Splinter Cell, Teen Need for Speed, Everyone The DaVinci Code, Teen Cars, Everyone Beau Geste, PG I Remember Mama, NR Tora! Tora! Tora!, G A Man for All Seasons, G Hook, PG Around the World in 80 Days, G Harry Potter and the Sorcerer's Stone, PG Camelot, G |
As always, I hope this helps those learning how to use Perl and Linux against the MySQL Database. If you want a nice tutorial on Perl and MySQL, check The tutorialspoint.com web site.
Python-MySQL Program
This post works through the Python configuration of Fedora instance, and continues the configuration of my LAMP VMware instance. It covers how you add the MySQL-python libraries to the Fedora instance, and provides the students with one more language opportunity for their capstone lab in the database class.
A standard Fedora Linux distribution installs Python 2.7 by default. Unfortunately, the MySQL-python library isn’t installed by default. You can verify the Python version by writing and running the following version.py program before installing the MySQL-python library:
1 2 3 4 5 | # Import sys library. import sys # Print the Python version. print sys.version |
You can run the version.py program dynamically like this from the current working directory:
python version.py |
It will print the following:
2.7.5 (default, Nov 3 2014, 14:26:24) [GCC 4.8.3 20140911 (Red Hat 4.8.3-7)] |
If you modify the program by adding the following first line
1 2 3 4 5 6 7 | #!/usr/bin/python # Import sys library. import sys # Print the Python version. print sys.version |
Provided you’ve set the file permissions to read and execute, you can run the program by simply calling version.py like this from the present working directory:
./version.py |
You can install the MySQL-python library with the yum utility like this:
yum install -y MySQL-python |
It shows you the following output:
Loaded plugins: langpacks, refresh-packagekit mysql-connectors-community | 2.5 kB 00:00 mysql-tools-community | 2.5 kB 00:00 mysql56-community | 2.5 kB 00:00 pgdg93 | 3.6 kB 00:00 updates/20/x86_64/metalink | 12 kB 00:00 updates | 4.9 kB 00:00 updates/20/x86_64/primary_db | 13 MB 00:04 (1/2): updates/20/x86_64/updateinfo | 1.9 MB 00:02 (2/2): updates/20/x86_64/pkgtags | 1.4 MB 00:02 Resolving Dependencies --> Running transaction check ---> Package MySQL-python.x86_64 0:1.2.3-8.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: MySQL-python x86_64 1.2.3-8.fc20 fedora 82 k Transaction Summary ================================================================================ Install 1 Package Total download size: 82 k Installed size: 231 k Downloading packages: MySQL-python-1.2.3-8.fc20.x86_64.rpm | 82 kB 00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : MySQL-python-1.2.3-8.fc20.x86_64 1/1 Verifying : MySQL-python-1.2.3-8.fc20.x86_64 1/1 Installed: MySQL-python.x86_64 0:1.2.3-8.fc20 Complete! |
After installing the MySQL-python library, you can call the following mysql_connect.py program from the local directory:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 | #!/usr/bin/python # Import sys library. import MySQLdb import sys try: # Create new database connection. db = MySQLdb.connect('localhost','student','student','studentdb') # Query the version of the MySQL database. db.query("SELECT version()") # Assign the query results to a local variable. result = db.use_result() # Print the results. print "MySQL Version: %s " % result.fetch_row()[0] except MySQLdb.Error, e: # Print the error. print "ERROR %d: %s" % (e.args[0], e.args[1]) sys.exit(1) finally: # Close the connection when it is open. if db: db.close() |
Like the version.py program, set the file permissions to read and execute and call , you can run the program by simply calling mysql_connect.py program like this from the present working directory:
./mysql_connect.py |
The mysql_connect.py program displays:
MySQL Version: 5.6.24 |
After verifying the MySQL connection, you can query actual data with the following mysql_queryset.py program:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 | #!/usr/bin/python # Import sys library. import MySQLdb import sys try: # Create new database connection. db = MySQLdb.connect('localhost','student','student','studentdb') # Create a result set cursor. rs = db.cursor() rs.execute("SELECT item_title FROM item") # Assign the query results to a local variable. rows = rs.fetchall() # Print the results. for row in rows: print row except MySQLdb.Error, e: # Print the error. print "ERROR %d: %s" % (e.args[0], e.args[1]) sys.exit(1) finally: # Close the connection when it is open. if db: db.close() |
You call the mysql_queryset.py file from the present working directory like this:
./mysql_queryset.py |
It prints the following:
('The Hunt for Red October',)
('Star Wars I',)
('Star Wars II',)
('Star Wars II',)
('Star Wars III',)
('The Chronicles of Narnia',)
('RoboCop',)
('Pirates of the Caribbean',)
('The Chronicles of Narnia',)
('MarioKart',)
('Splinter Cell',)
('Need for Speed',)
('The DaVinci Code',)
('Cars',)
('Beau Geste',)
('I Remember Mama',)
('Tora! Tora! Tora!',)
('A Man for All Seasons',)
('Hook',)
('Around the World in 80 Days',)
("Harry Potter and the Sorcerer's Stone",)
('Camelot',) |
You can substantially improve on the behavior of the prior example by handling each row one at a time. The following mysql_query.py program reads through the cursor result set one row at a time:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 | #!/usr/bin/python # Import sys library. import MySQLdb import sys try: # Create new database connection. db = MySQLdb.connect('localhost','student','student','studentdb') # Create a result set cursor. rs = db.cursor() rs.execute("SELECT item_title FROM item") # Assign the query results to a local variable. for i in range(rs.rowcount): row = rs.fetchone() print row[0] except MySQLdb.Error, e: # Print the error. print "ERROR %d: %s" % (e.args[0], e.args[1]) sys.exit(1) finally: # Close the connection when it is open. if db: db.close() |
You call the mysql_query.py with the following syntax:
./mysql_query.py |
It returns the following result set:
The Hunt for Red October Star Wars I Star Wars II Star Wars II Star Wars III The Chronicles of Narnia RoboCop Pirates of the Caribbean The Chronicles of Narnia MarioKart Splinter Cell Need for Speed The DaVinci Code Cars Beau Geste I Remember Mama Tora! Tora! Tora! A Man for All Seasons Hook Around the World in 80 Days Harry Potter and the Sorcerer's Stone Camelot |
As always, I hope this helps those looking for this type of solution. The Python tutorial web site teaches you more about the Python Programming Language. You may also find the TutorialsPoint.com site useful while you’re learning and using Python. The MySQLdb User’s Guide teaches more about working writing Python-MySQL library. The MySQLdb implements the Python Database API Specification v2.0.
Ruby-MySQL Program
After you install Ruby and build the Rails framework, you need to create the mysql gem. This blog post shows you how to create the mysql gem and how to write a simple Ruby program that queries the MySQL database.
The first step creates the mysql gem for Ruby programming:
gem install mysql |
It should show you the following:
Fetching: mysql-2.9.1.gem (100%) Building native extensions. This could take a while... Successfully installed mysql-2.9.1 Parsing documentation for mysql-2.9.1 Installing ri documentation for mysql-2.9.1 Done installing documentation for mysql after 0 seconds 1 gem installed |
After you install the mysql Ruby Gem, you can write and test a test.rb Ruby program that tests a MySQL database connection. The simplest complete code looks like this:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 | # Include Ruby Gem libraries. require 'rubygems' require 'mysql' begin # Create new database connection. db = Mysql.new('localhost','student','student','studentdb') # Print connected message. puts "Connected to the MySQL database server." rescue Mysql::Error => e # Print the error. puts "ERROR #{e.errno} (#{e.sqlstate}): #{e.error}" puts "Can't connect to the MySQL database specified." # Signal an error. exit 1 ensure # Close the connection when it is open. db.close if db end |
You can run the program with the following syntax:
ruby test.rb |
The program prints “Connected to the MySQL database server.” when there’s a student user with a student password that’s authorized to connect to the studentdb database. If any of the values are invalid when creating the connection, the program prints “Can’t connect to the MySQL database specified.”
Having tested the connection, the next query.rb program tests the connection by returning values from a query:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 | # Include Ruby Gem libraries. require 'rubygems' require 'mysql' # Begin block. begin # Create a new connection resource. db = Mysql.new('localhost','student','student','studentdb1') # Create a result set. rs = db.query('SELECT item_title FROM item') # Read through the result set hash. rs.each_hash do | row | puts "#{row['item_title']}" end # Release the result set resources. rs.free rescue Mysql::Error => e # Print the error. puts "ERROR #{e.errno} (#{e.sqlstate}): #{e.error}" puts "Can't connect to MySQL database specified." # Signal an error. exit 1 ensure # Close the connection when it is open. db.close if db end |
You can test it with the following command-line syntax:
ruby query.rb |
It returns a data set like this from the item table of my video store example:
+---------------------------------------+ | item_title | +---------------------------------------+ | The Hunt for Red October | | Star Wars I | | Star Wars II | | Star Wars II | | Star Wars III | | The Chronicles of Narnia | | RoboCop | | Pirates of the Caribbean | | The Chronicles of Narnia | | MarioKart | | Splinter Cell | | Need for Speed | | The DaVinci Code | | Cars | | Beau Geste | | I Remember Mama | | Tora! Tora! Tora! | | A Man for All Seasons | | Hook | | Around the World in 80 Days | | Harry Potter and the Sorcerer's Stone | | Camelot | +---------------------------------------+ 22 rows in set (0.00 sec) |
You need the ruby interpreter to run them. You can make the programs standalone operations by putting the following line as the first line in your Ruby programs.
1 | #!/usr/bin/ruby |
Then, you can run the program like this if they have read and execute privileges and are located in the present working directory where you issue the following command:
./mysql_query.rb |
If you want to work with individual columns, please check this subsequent post that shows how you can access individual columns. As always, I hope this helps those trying to get things working.
After posting this somebody asked for books that could help them learn how to write Ruby programs. While books are nice and listed below, I’d start with the tryruby.org web site.
I’d recommend the following books because …
- The Ruby Programming Language is 7 years old now and only covers Ruby 1.8 and 1.9, but its written by David Flanagan and the creator of the Ruby Programming Language – Yukihiro Matsumoto.
- Programming Ruby 1.9 & 2.0: The Pragmatic Programmer’s Guide is more current and a well balanced approach at learning how to write Ruby programs.
- The Well-Grounded Rubyist is the most current book and teaches you how to think about writing Ruby beyond just the syntax. As a Manning book, you can purchase the physical copy and automatically get a downloadable ebook. It’s certainly the best value for the money option provided you already know how to program in at least one other object-oriented programming language.
Install Ruby on Fedora
I use a Fedora 20 VM image to teach Oracle and MySQL technology. Last week, I expanded the Fedora VM image to support a full LAMP stack. This blog shows you how to install Ruby on Fedora and successfully generate the Rails gems.
Connect as the root user and use yum to install the libraries. My approach is by library or small groups. Naturally, you start with the ruby library.
yum install ruby |
You will see the following:
Loaded plugins: langpacks, refresh-packagekit mysql-connectors-community | 2.5 kB 00:00 mysql-tools-community | 2.5 kB 00:00 mysql56-community | 2.5 kB 00:00 pgdg93 | 3.6 kB 00:00 updates/20/x86_64/metalink | 14 kB 00:00 updates | 4.9 kB 00:00 (1/3): mysql56-community/20/x86_64/primary_db | 80 kB 00:00 (2/3): pgdg93/20/x86_64/primary_db | 80 kB 00:00 (3/3): updates/20/x86_64/primary_db | 13 MB 00:06 (1/2): updates/20/x86_64/pkgtags | 1.4 MB 00:01 (2/2): updates/20/x86_64/updateinfo | 1.9 MB 00:01 Resolving Dependencies --> Running transaction check ---> Package ruby.x86_64 0:2.0.0.353-16.fc20 will be installed --> Processing Dependency: ruby-libs(x86-64) = 2.0.0.353-16.fc20 for package: ruby-2.0.0.353-16.fc20.x86_64 --> Processing Dependency: rubygem(bigdecimal) >= 1.2.0 for package: ruby-2.0.0.353-16.fc20.x86_64 --> Processing Dependency: ruby(rubygems) >= 2.0.3 for package: ruby-2.0.0.353-16.fc20.x86_64 --> Processing Dependency: /usr/bin/ruby for package: ruby-2.0.0.353-16.fc20.x86_64 --> Processing Dependency: libruby.so.2.0()(64bit) for package: ruby-2.0.0.353-16.fc20.x86_64 --> Running transaction check ---> Package ruby-libs.x86_64 0:2.0.0.353-16.fc20 will be installed ---> Package rubygem-bigdecimal.x86_64 0:1.2.0-16.fc20 will be installed ---> Package rubygems.noarch 0:2.1.11-115.fc20 will be installed --> Processing Dependency: rubygem(rdoc) >= 4.0.0 for package: rubygems-2.1.11-115.fc20.noarch --> Processing Dependency: rubygem(psych) >= 2.0.0 for package: rubygems-2.1.11-115.fc20.noarch --> Processing Dependency: rubygem(io-console) >= 0.4.1 for package: rubygems-2.1.11-115.fc20.noarch ---> Package rubypick.noarch 0:1.1.1-1.fc20 will be installed --> Running transaction check ---> Package rubygem-io-console.x86_64 0:0.4.2-16.fc20 will be installed ---> Package rubygem-psych.x86_64 0:2.0.0-16.fc20 will be installed --> Processing Dependency: libyaml-0.so.2()(64bit) for package: rubygem-psych-2.0.0-16.fc20.x86_64 ---> Package rubygem-rdoc.noarch 0:4.0.1-2.fc20 will be installed --> Processing Dependency: rubygem(json) < 2 for package: rubygem-rdoc-4.0.1-2.fc20.noarch --> Processing Dependency: rubygem(json) >= 1.4 for package: rubygem-rdoc-4.0.1-2.fc20.noarch --> Processing Dependency: ruby(irb) for package: rubygem-rdoc-4.0.1-2.fc20.noarch --> Running transaction check ---> Package libyaml.x86_64 0:0.1.6-2.fc20 will be installed ---> Package ruby-irb.noarch 0:2.0.0.353-16.fc20 will be installed ---> Package rubygem-json.x86_64 0:1.7.7-101.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: ruby x86_64 2.0.0.353-16.fc20 updates 65 k Installing for dependencies: libyaml x86_64 0.1.6-2.fc20 updates 55 k ruby-irb noarch 2.0.0.353-16.fc20 updates 86 k ruby-libs x86_64 2.0.0.353-16.fc20 updates 2.8 M rubygem-bigdecimal x86_64 1.2.0-16.fc20 updates 77 k rubygem-io-console x86_64 0.4.2-16.fc20 updates 48 k rubygem-json x86_64 1.7.7-101.fc20 fedora 60 k rubygem-psych x86_64 2.0.0-16.fc20 updates 75 k rubygem-rdoc noarch 4.0.1-2.fc20 fedora 288 k rubygems noarch 2.1.11-115.fc20 updates 224 k rubypick noarch 1.1.1-1.fc20 updates 6.3 k Transaction Summary ================================================================================ Install 1 Package (+10 Dependent packages) Total download size: 3.7 M Installed size: 13 M Is this ok [y/d/N]: y Downloading packages: (1/11): ruby-2.0.0.353-16.fc20.x86_64.rpm | 65 kB 00:00 (2/11): libyaml-0.1.6-2.fc20.x86_64.rpm | 55 kB 00:00 (3/11): ruby-irb-2.0.0.353-16.fc20.noarch.rpm | 86 kB 00:00 (4/11): rubygem-io-console-0.4.2-16.fc20.x86_64.rpm | 48 kB 00:00 (5/11): rubygem-json-1.7.7-101.fc20.x86_64.rpm | 60 kB 00:00 (6/11): rubygem-psych-2.0.0-16.fc20.x86_64.rpm | 75 kB 00:00 (7/11): rubypick-1.1.1-1.fc20.noarch.rpm | 6.3 kB 00:00 (8/11): rubygem-bigdecimal-1.2.0-16.fc20.x86_64.rpm | 77 kB 00:01 (9/11): rubygem-rdoc-4.0.1-2.fc20.noarch.rpm | 288 kB 00:00 (10/11): ruby-libs-2.0.0.353-16.fc20.x86_64.rpm | 2.8 MB 00:01 (11/11): rubygems-2.1.11-115.fc20.noarch.rpm | 224 kB 00:01 -------------------------------------------------------------------------------- Total 1.4 MB/s | 3.7 MB 00:02 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : ruby-libs-2.0.0.353-16.fc20.x86_64 1/11 Installing : libyaml-0.1.6-2.fc20.x86_64 2/11 Installing : rubygem-bigdecimal-1.2.0-16.fc20.x86_64 3/11 Installing : rubygem-json-1.7.7-101.fc20.x86_64 4/11 Installing : rubygem-psych-2.0.0-16.fc20.x86_64 5/11 Installing : rubygem-rdoc-4.0.1-2.fc20.noarch 6/11 Installing : ruby-irb-2.0.0.353-16.fc20.noarch 7/11 Installing : rubypick-1.1.1-1.fc20.noarch 8/11 Installing : ruby-2.0.0.353-16.fc20.x86_64 9/11 Installing : rubygems-2.1.11-115.fc20.noarch 10/11 Installing : rubygem-io-console-0.4.2-16.fc20.x86_64 11/11 Verifying : rubygem-io-console-0.4.2-16.fc20.x86_64 1/11 Verifying : rubygem-rdoc-4.0.1-2.fc20.noarch 2/11 Verifying : rubygems-2.1.11-115.fc20.noarch 3/11 Verifying : rubygem-bigdecimal-1.2.0-16.fc20.x86_64 4/11 Verifying : ruby-libs-2.0.0.353-16.fc20.x86_64 5/11 Verifying : rubygem-json-1.7.7-101.fc20.x86_64 6/11 Verifying : rubygem-psych-2.0.0-16.fc20.x86_64 7/11 Verifying : rubypick-1.1.1-1.fc20.noarch 8/11 Verifying : ruby-2.0.0.353-16.fc20.x86_64 9/11 Verifying : libyaml-0.1.6-2.fc20.x86_64 10/11 Verifying : ruby-irb-2.0.0.353-16.fc20.noarch 11/11 Installed: ruby.x86_64 0:2.0.0.353-16.fc20 Dependency Installed: libyaml.x86_64 0:0.1.6-2.fc20 ruby-irb.noarch 0:2.0.0.353-16.fc20 ruby-libs.x86_64 0:2.0.0.353-16.fc20 rubygem-bigdecimal.x86_64 0:1.2.0-16.fc20 rubygem-io-console.x86_64 0:0.4.2-16.fc20 rubygem-json.x86_64 0:1.7.7-101.fc20 rubygem-psych.x86_64 0:2.0.0-16.fc20 rubygem-rdoc.noarch 0:4.0.1-2.fc20 rubygems.noarch 0:2.1.11-115.fc20 rubypick.noarch 0:1.1.1-1.fc20 Complete! |
After you install ruby, you need to install the MySQL and Ruby development libraries, like this:
yum -y install gcc mysql-devel ruby-devel rubygems |
Loaded plugins: langpacks, refresh-packagekit Package gcc-4.8.3-7.fc20.x86_64 already installed and latest version Package rubygems-2.1.11-115.fc20.noarch already installed and latest version Resolving Dependencies --> Running transaction check ---> Package mysql-community-devel.x86_64 0:5.6.24-1.fc20 will be installed --> Processing Dependency: mysql-community-libs(x86-64) = 5.6.24-1.fc20 for package: mysql-community-devel-5.6.24-1.fc20.x86_64 ---> Package ruby-devel.x86_64 0:2.0.0.353-16.fc20 will be installed --> Running transaction check ---> Package mysql-community-libs.x86_64 0:5.6.23-1.fc20 will be updated --> Processing Dependency: mysql-community-libs(x86-64) = 5.6.23-1.fc20 for package: mysql-community-client-5.6.23-1.fc20.x86_64 ---> Package mysql-community-libs.x86_64 0:5.6.24-1.fc20 will be an update --> Processing Dependency: mysql-community-common(x86-64) = 5.6.24-1.fc20 for package: mysql-community-libs-5.6.24-1.fc20.x86_64 --> Running transaction check ---> Package mysql-community-client.x86_64 0:5.6.23-1.fc20 will be updated --> Processing Dependency: mysql-community-client(x86-64) = 5.6.23-1.fc20 for package: mysql-community-server-5.6.23-1.fc20.x86_64 ---> Package mysql-community-client.x86_64 0:5.6.24-1.fc20 will be an update ---> Package mysql-community-common.x86_64 0:5.6.23-1.fc20 will be updated ---> Package mysql-community-common.x86_64 0:5.6.24-1.fc20 will be an update --> Running transaction check ---> Package mysql-community-server.x86_64 0:5.6.23-1.fc20 will be updated ---> Package mysql-community-server.x86_64 0:5.6.24-1.fc20 will be an update --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: mysql-community-devel x86_64 5.6.24-1.fc20 mysql56-community 3.4 M ruby-devel x86_64 2.0.0.353-16.fc20 updates 125 k Updating for dependencies: mysql-community-client x86_64 5.6.24-1.fc20 mysql56-community 19 M mysql-community-common x86_64 5.6.24-1.fc20 mysql56-community 258 k mysql-community-libs x86_64 5.6.24-1.fc20 mysql56-community 2.0 M mysql-community-server x86_64 5.6.24-1.fc20 mysql56-community 55 M Transaction Summary ================================================================================ Install 2 Packages Upgrade ( 4 Dependent packages) Total download size: 80 M Downloading packages: No Presto metadata available for mysql56-community (1/6): mysql-community-common-5.6.24-1.fc20.x86_64.rpm | 258 kB 00:01 (2/6): mysql-community-devel-5.6.24-1.fc20.x86_64.rpm | 3.4 MB 00:01 (3/6): mysql-community-libs-5.6.24-1.fc20.x86_64.rpm | 2.0 MB 00:00 (4/6): ruby-devel-2.0.0.353-16.fc20.x86_64.rpm | 125 kB 00:00 (5/6): mysql-community-client-5.6.24-1.fc20.x86_64.rpm | 19 MB 00:09 (6/6): mysql-community-server-5.6.24-1.fc20.x86_64.rpm | 55 MB 00:21 -------------------------------------------------------------------------------- Total 3.3 MB/s | 80 MB 00:24 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Updating : mysql-community-common-5.6.24-1.fc20.x86_64 1/10 Updating : mysql-community-libs-5.6.24-1.fc20.x86_64 2/10 Updating : mysql-community-client-5.6.24-1.fc20.x86_64 3/10 Updating : mysql-community-server-5.6.24-1.fc20.x86_64 4/10 Installing : mysql-community-devel-5.6.24-1.fc20.x86_64 5/10 Installing : ruby-devel-2.0.0.353-16.fc20.x86_64 6/10 Cleanup : mysql-community-server-5.6.23-1.fc20.x86_64 7/10 Cleanup : mysql-community-client-5.6.23-1.fc20.x86_64 8/10 Cleanup : mysql-community-libs-5.6.23-1.fc20.x86_64 9/10 Cleanup : mysql-community-common-5.6.23-1.fc20.x86_64 10/10 Verifying : mysql-community-client-5.6.24-1.fc20.x86_64 1/10 Verifying : mysql-community-devel-5.6.24-1.fc20.x86_64 2/10 Verifying : ruby-devel-2.0.0.353-16.fc20.x86_64 3/10 Verifying : mysql-community-libs-5.6.24-1.fc20.x86_64 4/10 Verifying : mysql-community-common-5.6.24-1.fc20.x86_64 5/10 Verifying : mysql-community-server-5.6.24-1.fc20.x86_64 6/10 Verifying : mysql-community-client-5.6.23-1.fc20.x86_64 7/10 Verifying : mysql-community-server-5.6.23-1.fc20.x86_64 8/10 Verifying : mysql-community-libs-5.6.23-1.fc20.x86_64 9/10 Verifying : mysql-community-common-5.6.23-1.fc20.x86_64 10/10 Installed: mysql-community-devel.x86_64 0:5.6.24-1.fc20 ruby-devel.x86_64 0:2.0.0.353-16.fc20 Dependency Updated: mysql-community-client.x86_64 0:5.6.24-1.fc20 mysql-community-common.x86_64 0:5.6.24-1.fc20 mysql-community-libs.x86_64 0:5.6.24-1.fc20 mysql-community-server.x86_64 0:5.6.24-1.fc20 Complete! |
After installing ruby, exit the root account to your management account and run the following command from the Linux shell:
ruby -v |
It should show you:
ruby 2.0.0p353 (2013-11-22 revision 43784) [x86_64-linux] |
Before you can run gem to install rails, you must install another the libxml2-devel library. Here’s the syntax to install the libxml2-devel library:
yum install libxml2-devel |
You should see the following, which includes typing a y to continue:
Loaded plugins: langpacks, refresh-packagekit Resolving Dependencies --> Running transaction check ---> Package libxml2-devel.x86_64 0:2.9.1-3.fc20 will be installed --> Processing Dependency: zlib-devel for package: libxml2-devel-2.9.1-3.fc20.x86_64 --> Processing Dependency: xz-devel for package: libxml2-devel-2.9.1-3.fc20.x86_64 --> Running transaction check ---> Package xz-devel.x86_64 0:5.1.2-12alpha.fc20 will be installed ---> Package zlib-devel.x86_64 0:1.2.8-3.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libxml2-devel x86_64 2.9.1-3.fc20 updates 1.0 M Installing for dependencies: xz-devel x86_64 5.1.2-12alpha.fc20 updates 45 k zlib-devel x86_64 1.2.8-3.fc20 fedora 50 k Transaction Summary ================================================================================ Install 1 Package (+2 Dependent packages) Total download size: 1.1 M Installed size: 9.1 M Is this ok [y/d/N]: y Downloading packages: (1/3): xz-devel-5.1.2-12alpha.fc20.x86_64.rpm | 45 kB 00:00 (2/3): zlib-devel-1.2.8-3.fc20.x86_64.rpm | 50 kB 00:00 (3/3): libxml2-devel-2.9.1-3.fc20.x86_64.rpm | 1.0 MB 00:04 -------------------------------------------------------------------------------- Total 264 kB/s | 1.1 MB 00:04 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : zlib-devel-1.2.8-3.fc20.x86_64 1/3 Installing : xz-devel-5.1.2-12alpha.fc20.x86_64 2/3 Installing : libxml2-devel-2.9.1-3.fc20.x86_64 3/3 Verifying : xz-devel-5.1.2-12alpha.fc20.x86_64 1/3 Verifying : libxml2-devel-2.9.1-3.fc20.x86_64 2/3 Verifying : zlib-devel-1.2.8-3.fc20.x86_64 3/3 Installed: libxml2-devel.x86_64 0:2.9.1-3.fc20 Dependency Installed: xz-devel.x86_64 0:5.1.2-12alpha.fc20 zlib-devel.x86_64 0:1.2.8-3.fc20 Complete! |
yum install libxslt-devel |
You should see the following and will need to reply with a y during install:
Loaded plugins: langpacks, refresh-packagekit mysql-connectors-community | 2.5 kB 00:00 mysql-tools-community | 2.5 kB 00:00 mysql56-community | 2.5 kB 00:00 pgdg93 | 3.6 kB 00:00 updates/20/x86_64/metalink | 14 kB 00:00 updates | 4.9 kB 00:00 updates/20/x86_64/primary_db | 13 MB 00:07 updates/20/x86_64/pkgtags FAILED http://mirror.utexas.edu/fedora/linux/updates/20/x86_64/repodata/fe40e35e0289ae1470dbe8030c09b8046924cbaa5e16ac61e9411ac57477820b-pkgtags.sqlite.gz: [Errno 14] HTTP Error 404 - Not Found Trying other mirror. (1/2): updates/20/x86_64/updateinfo | 1.9 MB 00:02 (2/2): updates/20/x86_64/pkgtags | 1.4 MB 00:00 Resolving Dependencies --> Running transaction check ---> Package libxslt-devel.x86_64 0:1.1.28-5.fc20 will be installed --> Processing Dependency: libgcrypt-devel for package: libxslt-devel-1.1.28-5.fc20.x86_64 --> Running transaction check ---> Package libgcrypt-devel.x86_64 0:1.5.3-2.fc20 will be installed --> Processing Dependency: libgpg-error-devel for package: libgcrypt-devel-1.5.3-2.fc20.x86_64 --> Running transaction check ---> Package libgpg-error-devel.x86_64 0:1.12-1.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: libxslt-devel x86_64 1.1.28-5.fc20 fedora 309 k Installing for dependencies: libgcrypt-devel x86_64 1.5.3-2.fc20 fedora 127 k libgpg-error-devel x86_64 1.12-1.fc20 fedora 16 k Transaction Summary ================================================================================ Install 1 Package (+2 Dependent packages) Total download size: 451 k Installed size: 2.6 M Is this ok [y/d/N]: y Downloading packages: (1/3): libgcrypt-devel-1.5.3-2.fc20.x86_64.rpm | 127 kB 00:00 (2/3): libgpg-error-devel-1.12-1.fc20.x86_64.rpm | 16 kB 00:00 (3/3): libxslt-devel-1.1.28-5.fc20.x86_64.rpm | 309 kB 00:00 -------------------------------------------------------------------------------- Total 454 kB/s | 451 kB 00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : libgpg-error-devel-1.12-1.fc20.x86_64 1/3 Installing : libgcrypt-devel-1.5.3-2.fc20.x86_64 2/3 Installing : libxslt-devel-1.1.28-5.fc20.x86_64 3/3 Verifying : libgcrypt-devel-1.5.3-2.fc20.x86_64 1/3 Verifying : libgpg-error-devel-1.12-1.fc20.x86_64 2/3 Verifying : libxslt-devel-1.1.28-5.fc20.x86_64 3/3 Installed: libxslt-devel.x86_64 0:1.1.28-5.fc20 Dependency Installed: libgcrypt-devel.x86_64 0:1.5.3-2.fc20 libgpg-error-devel.x86_64 0:1.12-1.fc20 Complete! |
One more to go. You can’t run the Ruby gem utility to create the nokogiri Ruby Gem on Fedora because of a library mismatch. If you attempt to create the Rails framework, like this:
gem install rails |
It’ll raise the following error message on trying to dynamically link the nokogiri Ruby Gem. The error will be something like this, and unfortunately, the log files won’t be too useful:
Running patch with /usr/local/share/gems/gems/nokogiri-1.6.6.2/ports/patches/libxml2/0001-Revert-Missing-initialization-for-the-catalog-module.patch... Running 'patch' for libxml2 2.9.2... ERROR, review '/usr/local/share/gems/gems/nokogiri-1.6.6.2/ext/nokogiri/tmp/x86_64-redhat-linux-gnu/ports/libxml2/2.9.2/patch.log' to see what happened. *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. |
The error message isn’t very helpful but the fix is fortunately easy. You install the nokogiri Ruby Gem directly with the yum utility. The following instructs yum to proceed without waiting for you to type a y to install.
yum install -y rubygem-nokogiri |
Loaded plugins: langpacks, refresh-packagekit Resolving Dependencies --> Running transaction check ---> Package rubygem-nokogiri.x86_64 0:1.6.6.2-1.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: rubygem-nokogiri x86_64 1.6.6.2-1.fc20 updates 534 k Transaction Summary ================================================================================ Install 1 Package Total download size: 534 k Installed size: 834 k Downloading packages: rubygem-nokogiri-1.6.6.2-1.fc20.x86_64.rpm | 534 kB 00:00 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : rubygem-nokogiri-1.6.6.2-1.fc20.x86_64 1/1 Verifying : rubygem-nokogiri-1.6.6.2-1.fc20.x86_64 1/1 Installed: rubygem-nokogiri.x86_64 0:1.6.6.2-1.fc20 Complete! |
Now you can use the Ruby gem utility to create the Rails framework like this:
gem install rails |
This will take a couple minutes typically, so be patient. You see something like this, dependent on the release:
Fetching: loofah-2.0.1.gem (100%) Successfully installed loofah-2.0.1 Fetching: rails-html-sanitizer-1.0.2.gem (100%) Successfully installed rails-html-sanitizer-1.0.2 Fetching: rails-deprecated_sanitizer-1.0.3.gem (100%) Successfully installed rails-deprecated_sanitizer-1.0.3 Fetching: rails-dom-testing-1.0.6.gem (100%) Successfully installed rails-dom-testing-1.0.6 Fetching: builder-3.2.2.gem (100%) Successfully installed builder-3.2.2 Fetching: erubis-2.7.0.gem (100%) Successfully installed erubis-2.7.0 Fetching: actionview-4.2.1.gem (100%) Successfully installed actionview-4.2.1 Fetching: actionpack-4.2.1.gem (100%) Successfully installed actionpack-4.2.1 Fetching: activemodel-4.2.1.gem (100%) Successfully installed activemodel-4.2.1 Fetching: arel-6.0.0.gem (100%) Successfully installed arel-6.0.0 Fetching: activerecord-4.2.1.gem (100%) Successfully installed activerecord-4.2.1 Fetching: globalid-0.3.5.gem (100%) Successfully installed globalid-0.3.5 Fetching: activejob-4.2.1.gem (100%) Successfully installed activejob-4.2.1 Fetching: mime-types-2.4.3.gem (100%) Successfully installed mime-types-2.4.3 Fetching: mail-2.6.3.gem (100%) Successfully installed mail-2.6.3 Fetching: actionmailer-4.2.1.gem (100%) Successfully installed actionmailer-4.2.1 Fetching: rake-10.4.2.gem (100%) Successfully installed rake-10.4.2 Fetching: thor-0.19.1.gem (100%) Successfully installed thor-0.19.1 Fetching: railties-4.2.1.gem (100%) Successfully installed railties-4.2.1 Fetching: bundler-1.9.2.gem (100%) Successfully installed bundler-1.9.2 Fetching: hike-1.2.3.gem (100%) Successfully installed hike-1.2.3 Fetching: multi_json-1.11.0.gem (100%) Successfully installed multi_json-1.11.0 Fetching: tilt-1.4.1.gem (100%) Successfully installed tilt-1.4.1 Fetching: sprockets-2.12.3.gem (100%) Successfully installed sprockets-2.12.3 Fetching: sprockets-rails-2.2.4.gem (100%) Successfully installed sprockets-rails-2.2.4 Fetching: rails-4.2.1.gem (100%) Successfully installed rails-4.2.1 Parsing documentation for actionmailer-4.2.1 Installing ri documentation for actionmailer-4.2.1 Parsing documentation for actionpack-4.2.1 Installing ri documentation for actionpack-4.2.1 Parsing documentation for actionview-4.2.1 Installing ri documentation for actionview-4.2.1 Parsing documentation for activejob-4.2.1 Installing ri documentation for activejob-4.2.1 Parsing documentation for activemodel-4.2.1 Installing ri documentation for activemodel-4.2.1 Parsing documentation for activerecord-4.2.1 Installing ri documentation for activerecord-4.2.1 Parsing documentation for arel-6.0.0 Installing ri documentation for arel-6.0.0 Parsing documentation for builder-3.2.2 Installing ri documentation for builder-3.2.2 Parsing documentation for bundler-1.9.2 Installing ri documentation for bundler-1.9.2 Parsing documentation for erubis-2.7.0 Installing ri documentation for erubis-2.7.0 Parsing documentation for globalid-0.3.5 Installing ri documentation for globalid-0.3.5 Parsing documentation for hike-1.2.3 Installing ri documentation for hike-1.2.3 Parsing documentation for loofah-2.0.1 Installing ri documentation for loofah-2.0.1 Parsing documentation for mail-2.6.3 Installing ri documentation for mail-2.6.3 Parsing documentation for mime-types-2.4.3 Installing ri documentation for mime-types-2.4.3 Parsing documentation for multi_json-1.11.0 Installing ri documentation for multi_json-1.11.0 Parsing documentation for rails-4.2.1 Installing ri documentation for rails-4.2.1 Parsing documentation for rails-deprecated_sanitizer-1.0.3 Installing ri documentation for rails-deprecated_sanitizer-1.0.3 Parsing documentation for rails-dom-testing-1.0.6 Installing ri documentation for rails-dom-testing-1.0.6 Parsing documentation for rails-html-sanitizer-1.0.2 Installing ri documentation for rails-html-sanitizer-1.0.2 Parsing documentation for railties-4.2.1 Installing ri documentation for railties-4.2.1 Parsing documentation for rake-10.4.2 Installing ri documentation for rake-10.4.2 Parsing documentation for sprockets-2.12.3 Installing ri documentation for sprockets-2.12.3 Parsing documentation for sprockets-rails-2.2.4 Installing ri documentation for sprockets-rails-2.2.4 Parsing documentation for thor-0.19.1 Installing ri documentation for thor-0.19.1 Parsing documentation for tilt-1.4.1 Installing ri documentation for tilt-1.4.1 Done installing documentation for actionmailer, actionpack, actionview, activejob, activemodel, activerecord, arel, builder, bundler, erubis, globalid, hike, loofah, mail, mime-types, multi_json, rails, rails-deprecated_sanitizer, rails-dom-testing, rails-html-sanitizer, railties, rake, sprockets, sprockets-rails, thor, tilt after 475 seconds 26 gems installed |
If you want to install Phusion Passenger, mod_passenger is already installed. You should note that support and testing for this stops at Fedora V17. You can verify installation with the following command:
yum list mod_passenger |
It returns:
Loaded plugins: langpacks, refresh-packagekit
Available Packages
mod_passenger.x86_64 4.0.53-3.fc20.2 updates |
You can also install the Ruby Gem for Passenger, like this:
gem install passenger |
It should take less than 2 minutes and return something like this:
Fetching: passenger-5.0.6.gem (100%) Building native extensions. This could take a while... Successfully installed passenger-5.0.6 Parsing documentation for passenger-5.0.6 Installing ri documentation for passenger-5.0.6 Done installing documentation for passenger after 9 seconds 1 gem installed |
As always, I hope this was helpful. I’ll add a post with the remaining MySQL and Oracle connection details soon.
Oracle 11g XE APEX
The question for most new Oracle users is what’s Apex? They have a different question When they discover how to connect to the Oracle Database 11g XE default instance with this URL:
http://localhost:8080/apex |
You’ll see the following web site, and wonder what do I enter for the Workspace, the Username, and the Password values?
The answers are:
- Default Workspace: INTERNAL
- Default User: ADMIN
- Default Password:
SYSorSYSTEMPassword from Install
Enter those values within the initial password time interval and you’ll arrive at the next screen where you can manage the Oracle Database 11g XE instance. If you wait too long, you’ll be redirected to enter the original SYS or SYSTEM password from install and a new password twice. The rules for a new password are:
- Password must contain at least 6 characters.
- New password must differ from old password by at least 2 characters.
- Password must contain at least one numeric character (0123456789).
- Password must contain at least one punctuation character (!”#$%&()“*+,-/:;<=>?_).
- Password must contain at least one upper-case alphabetic character.
- Password must not contain username.
Whether you go directly to the next screen or have to enter your a new password, you should see the following screen:
You can find the default configuration for the installation with the following anonymous PL/SQL block:
DECLARE /* Declare variables. */ lv_endpoint NUMBER := 1; lv_host VARCHAR2(80); lv_port NUMBER; lv_protocol NUMBER; BEGIN /* Check for current XDB settings. */ dbms_xdb.getlistenerendpoint( lv_endpoint , lv_host , lv_port , lv_protocol ); /* Print the values. */ dbms_output.put_line('Endpoint: ['||lv_endpoint||']'||CHR(10)|| 'Host: ['||lv_host||']'||CHR(10)|| 'Port: ['||lv_port||']'||CHR(10)|| 'Protocol: ['||lv_protocol||']'); END; / |
It should print the following:
Endpoint: [1] Host: [localhost] Port: [8080] Protocol: [1] |
This is a standalone configuration and you can’t connect to the XDB server from another machine. You can only connect from the local machine.
I hope this helps those trying to use the default Apex 4 installation provided as part of the Oracle Database 11g XE instance. You can read an older post of mine that shows you how to set up a basic Workspace, but after reflection I’ll write more about creating and managing workspaces.
LAMP php-gd Libraries
Everything seemed complete after configuring my standalone MySQL instance to a LAMP installation, but last night I started playing with the image files. It turns out that I failed to install the php-gd library.
There’s very little feedback when you try to troubleshoot why you can’t read an image. In fact, the error message for reading the BLOB from MySQL was only available on the local Firefox browser:
The image "http://localhost/ConvertMySQLBlobToImage.php" cannot be displayed because it contains errors. |
The fix requires root to install the php-gd library with the yum utility:
yum install php-gd |
You’ll need to answer y to one question during the installation:
Loaded plugins: langpacks, refresh-packagekit mysql-connectors-community | 2.5 kB 00:00 mysql-tools-community | 2.5 kB 00:00 mysql56-community | 2.5 kB 00:00 pgdg93 | 3.6 kB 00:00 updates/20/x86_64/metalink | 16 kB 00:00 Resolving Dependencies --> Running transaction check ---> Package php-gd.x86_64 0:5.5.22-1.fc20 will be installed --> Processing Dependency: libt1.so.5()(64bit) for package: php-gd-5.5.22-1.fc20.x86_64 --> Running transaction check ---> Package t1lib.x86_64 0:5.1.2-14.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: php-gd x86_64 5.5.22-1.fc20 updates 89 k Installing for dependencies: t1lib x86_64 5.1.2-14.fc20 updates 164 k Transaction Summary ================================================================================ Install 1 Package (+1 Dependent package) Total download size: 252 k Installed size: 629 k Is this ok [y/d/N]: y Downloading packages: (1/2): php-gd-5.5.22-1.fc20.x86_64.rpm | 89 kB 00:00 (2/2): t1lib-5.1.2-14.fc20.x86_64.rpm | 164 kB 00:01 -------------------------------------------------------------------------------- Total 157 kB/s | 252 kB 00:01 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : t1lib-5.1.2-14.fc20.x86_64 1/2 Installing : php-gd-5.5.22-1.fc20.x86_64 2/2 Verifying : php-gd-5.5.22-1.fc20.x86_64 1/2 Verifying : t1lib-5.1.2-14.fc20.x86_64 2/2 Installed: php-gd.x86_64 0:5.5.22-1.fc20 Dependency Installed: t1lib.x86_64 0:5.1.2-14.fc20 Complete! |
After the installation, you can run the info.php program, which contains the following:
1 2 3 | <?php phpinfo(); ?> |
You’ll find the following gd library display in the result from the info.php program:
After retesting, we get both large text and blob files displayed in the web page:
As always, I hope this helps others. Especially, those who are working with your LAMP stack implementation of images.
MySQL bind-address
While I try to keep things simple, sometimes eliminating options and explanations comes back to haunt me. After posting how to open a Fedora firewall port for a LAMP stack, somebody got trapped by my instructions for installing MySQL on Fedora. They got stuck because they had the following setting in their /etc/my.cnf file:
bind-address=localhost.localdomain |
I’d suggested using that bind-address value for a DHCP VMware Fedora installation in Step #7. I was trying to create an example for an isolated testing instance, which is why I set the bind-address to a localhost.localdomain value. They raised the following error when they tried to connect their base operating system’s version of MySQL Workstation to the Fedora VM:
Failed to Connect to MySQL at 192.168.2.168:3306 with user student |
or, this dialog image:
Before you do the next step, please ensure you’re using the right IP address. You can find that by running this command as an authorized sudoer:
ifconfig | grep inet.*netmask.*broadcast |
In this case, the command returns:
inet 192.168.2.168 netmask 255.255.255.0 broadcast 192.168.2.255 |
I’ve since added instructions to the older post to set the bind-address value in the my.cnf file as follows when they want to support external connections (naturally that means authorizing port 3306):
bind-address=0.0.0.0 |
After you reset the /etc/my.cnf file, you must stop and start, or restart the mysqld service. You can do that as the root user like this:
systemctl restart mysqld |
Then, you can test a student user connection from MySQL Workbench like this:
If the student user is authorized and the password is correct, you’ll see that the connection now works:
As always, I hope this helps those working through similar issues.
Fedora Install LAMP
My students wanted an extra credit assignment, so I thought a LAMP configuration and test would be appropriate. The only problem was I hadn’t added it to their course VMware instance. So, here are the instructions to install Apache2, PHP, and MySQLi for a complete LAMP stack when MySQL is already installed.
The post builds on my Fedora Install of MySQL and MySQL Workbench on Fedora posts from last year. It also presumes that you’ve installed a studentdb database but you need to know how to do that let me know (but it hasn’t changed much from the example at the bottom of this old MySQL 5.1 blog post).
You install Apache2 with the following command as the root user, or with the sudo command as a sudoer-list user:
yum install httpd |
The following displays the results of starting the yum utility to install httpd, and you need to reply with a y to complete the installation:
Loaded plugins: langpacks, refresh-packagekit mysql-connectors-community | 2.5 kB 00:00 mysql-tools-community | 2.5 kB 00:00 mysql56-community | 2.5 kB 00:00 pgdg93 | 3.6 kB 00:00 updates/20/x86_64/metalink | 16 kB 00:00 updates | 4.9 kB 00:00 updates/20/x86_64/primary_db | 13 MB 00:04 (1/2): updates/20/x86_64/updateinfo | 1.9 MB 00:02 (2/2): updates/20/x86_64/pkgtags | 1.4 MB 00:01 Resolving Dependencies --> Running transaction check ---> Package httpd.x86_64 0:2.4.10-2.fc20 will be installed --> Processing Dependency: httpd-tools = 2.4.10-2.fc20 for package: httpd-2.4.10-2.fc20.x86_64 --> Processing Dependency: system-logos-httpd for package: httpd-2.4.10-2.fc20.x86_64 --> Running transaction check ---> Package fedora-logos-httpd.noarch 0:21.0.1-1.fc20 will be installed ---> Package httpd-tools.x86_64 0:2.4.10-2.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: httpd x86_64 2.4.10-2.fc20 updates 1.2 M Installing for dependencies: fedora-logos-httpd noarch 21.0.1-1.fc20 fedora 28 k httpd-tools x86_64 2.4.10-2.fc20 updates 79 k Transaction Summary ================================================================================ Install 1 Package (+2 Dependent packages) Total download size: 1.3 M Installed size: 4.0 M Is this ok [y/d/N]: y Downloading packages: (1/3): fedora-logos-httpd-21.0.1-1.fc20.noarch.rpm | 28 kB 00:00 (2/3): httpd-2.4.10-2.fc20.x86_64.rpm | 1.2 MB 00:01 (3/3): httpd-tools-2.4.10-2.fc20.x86_64.rpm | 79 kB 00:00 -------------------------------------------------------------------------------- Total 815 kB/s | 1.3 MB 00:01 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : httpd-tools-2.4.10-2.fc20.x86_64 1/3 Installing : fedora-logos-httpd-21.0.1-1.fc20.noarch 2/3 Installing : httpd-2.4.10-2.fc20.x86_64 3/3 Verifying : httpd-2.4.10-2.fc20.x86_64 1/3 Verifying : fedora-logos-httpd-21.0.1-1.fc20.noarch 2/3 Verifying : httpd-tools-2.4.10-2.fc20.x86_64 3/3 Installed: httpd.x86_64 0:2.4.10-2.fc20 Dependency Installed: fedora-logos-httpd.noarch 0:21.0.1-1.fc20 httpd-tools.x86_64 0:2.4.10-2.fc20 Complete! |
Next, you install php as the root user with the following command:
yum install php |
The following displays when you install php, and you need to reply with a y to complete the installation:
Loaded plugins: langpacks, refresh-packagekit Resolving Dependencies --> Running transaction check ---> Package php.x86_64 0:5.5.22-1.fc20 will be installed --> Processing Dependency: php-common(x86-64) = 5.5.22-1.fc20 for package: php-5.5.22-1.fc20.x86_64 --> Processing Dependency: php-cli(x86-64) = 5.5.22-1.fc20 for package: php-5.5.22-1.fc20.x86_64 --> Running transaction check ---> Package php-cli.x86_64 0:5.5.22-1.fc20 will be installed ---> Package php-common.x86_64 0:5.5.22-1.fc20 will be installed --> Processing Dependency: php-pecl-jsonc(x86-64) for package: php-common-5.5.22-1.fc20.x86_64 --> Running transaction check ---> Package php-pecl-jsonc.x86_64 0:1.3.6-1.fc20 will be installed --> Processing Dependency: /usr/bin/pecl for package: php-pecl-jsonc-1.3.6-1.fc20.x86_64 --> Processing Dependency: /usr/bin/pecl for package: php-pecl-jsonc-1.3.6-1.fc20.x86_64 --> Running transaction check ---> Package php-pear.noarch 1:1.9.5-6.fc20 will be installed --> Processing Dependency: php-xml for package: 1:php-pear-1.9.5-6.fc20.noarch --> Processing Dependency: php-posix for package: 1:php-pear-1.9.5-6.fc20.noarch --> Running transaction check ---> Package php-process.x86_64 0:5.5.22-1.fc20 will be installed ---> Package php-xml.x86_64 0:5.5.22-1.fc20 will be installed --> Finished Dependency Resolution Dependencies Resolved ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: php x86_64 5.5.22-1.fc20 updates 2.6 M Installing for dependencies: php-cli x86_64 5.5.22-1.fc20 updates 3.9 M php-common x86_64 5.5.22-1.fc20 updates 1.0 M php-pear noarch 1:1.9.5-6.fc20 updates 343 k php-pecl-jsonc x86_64 1.3.6-1.fc20 updates 34 k php-process x86_64 5.5.22-1.fc20 updates 77 k php-xml x86_64 5.5.22-1.fc20 updates 247 k Transaction Summary ================================================================================ Install 1 Package (+6 Dependent packages) Total download size: 8.2 M Installed size: 32 M Is this ok [y/d/N]: y Downloading packages: (1/7): php-5.5.22-1.fc20.x86_64.rpm | 2.6 MB 00:03 (2/7): php-cli-5.5.22-1.fc20.x86_64.rpm | 3.9 MB 00:03 (3/7): php-common-5.5.22-1.fc20.x86_64.rpm | 1.0 MB 00:00 (4/7): php-pear-1.9.5-6.fc20.noarch.rpm | 343 kB 00:00 (5/7): php-pecl-jsonc-1.3.6-1.fc20.x86_64.rpm | 34 kB 00:00 (6/7): php-process-5.5.22-1.fc20.x86_64.rpm | 77 kB 00:00 (7/7): php-xml-5.5.22-1.fc20.x86_64.rpm | 247 kB 00:00 -------------------------------------------------------------------------------- Total 1.1 MB/s | 8.2 MB 00:07 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : php-cli-5.5.22-1.fc20.x86_64 1/7 Installing : php-process-5.5.22-1.fc20.x86_64 2/7 Installing : php-xml-5.5.22-1.fc20.x86_64 3/7 Installing : 1:php-pear-1.9.5-6.fc20.noarch 4/7 Installing : php-common-5.5.22-1.fc20.x86_64 5/7 Installing : php-pecl-jsonc-1.3.6-1.fc20.x86_64 6/7 Installing : php-5.5.22-1.fc20.x86_64 7/7 Verifying : php-5.5.22-1.fc20.x86_64 1/7 Verifying : php-common-5.5.22-1.fc20.x86_64 2/7 Verifying : php-cli-5.5.22-1.fc20.x86_64 3/7 Verifying : 1:php-pear-1.9.5-6.fc20.noarch 4/7 Verifying : php-process-5.5.22-1.fc20.x86_64 5/7 Verifying : php-xml-5.5.22-1.fc20.x86_64 6/7 Verifying : php-pecl-jsonc-1.3.6-1.fc20.x86_64 7/7 Installed: php.x86_64 0:5.5.22-1.fc20 Dependency Installed: php-cli.x86_64 0:5.5.22-1.fc20 php-common.x86_64 0:5.5.22-1.fc20 php-pear.noarch 1:1.9.5-6.fc20 php-pecl-jsonc.x86_64 0:1.3.6-1.fc20 php-process.x86_64 0:5.5.22-1.fc20 php-xml.x86_64 0:5.5.22-1.fc20 Complete! |
After installing the software, you can set the Apache server to start automatically with the following command:
chkconfig httpd on |
However, that command only starts the Apache server the next time you boot the server. You use the following command as the root user to start the Apache server:
apachectl start |
You can verify the installation with the following command as the root user:
ps -ef | grep httpd | grep -v grep |
It should return:
root 5433 1 0 17:03 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND apache 5434 5433 0 17:03 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND apache 5435 5433 0 17:03 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND apache 5436 5433 0 17:03 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND apache 5437 5433 0 17:03 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND apache 5438 5433 0 17:03 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND apache 5442 5433 0 17:03 ? 00:00:00 /usr/sbin/httpd -DFOREGROUND |
and, then verify the listening port with the following command as the root user:
netstat -tulpn | grep :80 |
It should return the following when both the Apache server is listening on port 80 and the Oracle multi-protocol server is listening on port 8080:
tcp6 0 0 :::80 :::* LISTEN 5433/httpd tcp6 0 0 :::8080 :::* LISTEN 1505/tnslsnr |
After verifying the connection, you can test it by creating the traditional info.php program file in the /var/www/http directory. The file should contain the following:
1 2 3 | <?php phpinfo(); ?> |
You can test it by opening the Firefox browser and entering the following URL from the Fedora Linux image:
http://localhost/info.php |
It should display the typical diagnostic page. This verifies the configuration of the Apache and PHP servers. The next step verifies whether you have the mysqli library to connect to the MySQL database.
You create a mysqli_check.php script, like this:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 | <html>
<header>
<title>Static Query Object Sample</title>
<style type="text/css">
/* HTML element styles. */
table {background:white;border-style:solid;border-width:3px;border-color:black;border-collapse:collapse;}
th {text-align:center;font-style:bold;background:lightgray;border:solid 1px gray;}
td {border:solid 1px gray;}
/* Class tag element styles. */
.ID {min-width:50px;text-align:right;}
.Label {min-width:200px;text-align:left;}
</style>
</header>
<body>
<?php
if (!function_exists('mysqli_init') && !extension_loaded('mysqli')) {
print 'mysqli not installed.'; }
else {
print 'mysqli installed.'; }
?>
</script>
</body>
</html> |
You can test it with the following URL from the local browser:
http://localhost/mysqli_check.php |
If it’s installed you can skip the next step, but if not you need to run yum in expert mode as follows (the check for php-mysql isn’t really necessary because it’s too old a version but good practice):
[root@localhost etc]# yum shell Loaded plugins: langpacks, refresh-packagekit > remove php-mysql No Match for argument: php-mysql > install php-mysqlnd > run --> Running transaction check ---> Package php-mysqlnd.x86_64 0:5.5.22-1.fc20 will be installed --> Processing Dependency: php-pdo(x86-64) = 5.5.22-1.fc20 for package: php-mysqlnd-5.5.22-1.fc20.x86_64 --> Running transaction check ---> Package php-pdo.x86_64 0:5.5.22-1.fc20 will be installed --> Finished Dependency Resolution ================================================================================ Package Arch Version Repository Size ================================================================================ Installing: php-mysqlnd x86_64 5.5.22-1.fc20 updates 293 k Installing for dependencies: php-pdo x86_64 5.5.22-1.fc20 updates 141 k Transaction Summary ================================================================================ Install 1 Package (+1 Dependent package) Total download size: 433 k Installed size: 1.4 M Is this ok [y/d/N]: y Downloading packages: (1/2): php-mysqlnd-5.5.22-1.fc20.x86_64.rpm | 293 kB 00:00 (2/2): php-pdo-5.5.22-1.fc20.x86_64.rpm | 141 kB 00:00 -------------------------------------------------------------------------------- Total 427 kB/s | 433 kB 00:01 Running transaction check Running transaction test Transaction test succeeded Running transaction (shutdown inhibited) Installing : php-pdo-5.5.22-1.fc20.x86_64 1/2 Installing : php-mysqlnd-5.5.22-1.fc20.x86_64 2/2 Verifying : php-pdo-5.5.22-1.fc20.x86_64 1/2 Verifying : php-mysqlnd-5.5.22-1.fc20.x86_64 2/2 Installed: php-mysqlnd.x86_64 0:5.5.22-1.fc20 Dependency Installed: php-pdo.x86_64 0:5.5.22-1.fc20 Finished Transaction > quit |
You should note that this also installed PDO. One caveat, before you rerun the mysqli_check.php script from a browser, you need to restart the Apache server. You can do that as the root user with the following syntax:
apachectl restart |
You can retest it with the following URL from the local browser:
http://localhost/mysqli_check.php |
At this point you should have everything installed to test your connection the MySQL database. As mentioned, this example extends my instructions for installing MySQL on the Fedora instance.
The following query.php file tests your ability to connect to the MySQL database with the mysqli driver, and it uses the studentdb and video store example from my Oracle Database 11g and MySQL 5.6 Developer Handbook:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 | <html>
<header>
<title>Static Query Object Sample</title>
<style type="text/css">
/* HTML element styles. */
table {background:white;border-style:solid;border-width:3px;border-color:black;border-collapse:collapse;}
th {text-align:center;font-style:bold;background:lightgray;border:solid 1px gray;}
td {border:solid 1px gray;}
/* Class tag element styles. */
.ID {min-width:50px;text-align:right;}
.Label {min-width:200px;text-align:left;}
</style>
</header>
<body>
<?php
// Assign credentials to connection.
$mysqli = new mysqli("localhost", "student", "student", "studentdb");
// Check for connection error and print message.
if ($mysqli->connect_errno) {
print $mysqli->connect_error."<br />";
print "Connection not established ...<br />";
}
else {
// Declare a static query.
$query = "SELECT au.system_user_id, au.system_user_name FROM system_user au" ;
// Loop through a result set until completed.
do {
// Attempt query and exit with failure before processing.
if (!$stmt = $mysqli->query($query)) {
// Print failure to resolve query message.
print $mysqli->error."<br />";
print "Failed to resolve query ...<br />";
}
else {
// Print the opening HTML table tag.
print '<table><tr><th class="ID">ID</th><th class="Label">User Role Name</th></tr>';
// Fetch a row for processing.
while( $row = $stmt->fetch_row() ) {
// Print the opening HTML row tag.
print "<tr>";
// Loop through the row's columns.
for ($i = 0;$i < $mysqli->field_count;$i++) {
// Handle column one differently.
if ($i == 0)
print '<td class="ID">'.$row[$i]."</td>";
else
print '<td class="Label">'.$row[$i]."</td>";
}
// Print the closing HTML row tag.
print "</tr>";
}
}
} while( $mysqli->next_result());
// Print the closing HTML table tag.
print "</table>";
// Release connection resource.
$mysqli->close(); }
?>
</script>
</body>
</html> |
This should display the following in the browser:
You can see how to open port 80 for the Apache server in this blog post. If you want to work with blob data types, you’ll also need to use yum to install the php-gd library. You can read my LAMP php-gd library blog post to learn how to install the libraries. As always, I hope a step-by-step approach without assumptions helps those learning MySQL.
Subscribe via RSS